Replacing clutch master cylinder (NB)

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

Post Reply
Staaahp
Driver
Posts: 61
Joined: Thu Apr 30, 2015 12:32 am
Vehicle: ND - 2 GT

Replacing clutch master cylinder (NB)

Postby Staaahp » Mon Aug 24, 2020 11:04 pm

Hi all,

In the process of replacing the clutch master cylinder and noticed that there is only one bolt accessible in the engine bay.

I was able to locate another bolt under the dash near the clutch pedal but it's such a pain to get to even with the driver's seat removed. Any easy way to get this sucker out that I might be missing?
Top
Snowmotion
Racing Driver
Posts: 750
Joined: Mon Jul 29, 2013 8:47 pm
Vehicle: NC
Location: Sydney

Re: Replacing clutch master cylinder (NB)

Postby Snowmotion » Mon Aug 24, 2020 11:23 pm

I just had to do the same job.. time to get flexible.. Good luck.
NB8A| WP 1:15.6 | SMP-S 1:08.56 | SMP-N 1:21.35
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
Top
User avatar
1600Dave
Fast Driver
Posts: 146
Joined: Tue May 05, 2015 9:32 am
Vehicle: NB8B
Location: Newcastle, NSW

Re: Replacing clutch master cylinder (NB)

Postby 1600Dave » Tue Aug 25, 2020 9:22 pm

Changed mine a few weeks back, the only easy way to do it is to pay someone else......
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 16 guests