Page 1 of 1
HPC Coating!!.... The exhaust is all done, *pics up*
Posted: Tue Oct 03, 2006 10:59 pm
by green_comet
Hey everyone,
I am looking at getting my newly purchased headers HPC Coated. I would just like to know if anyone knows of a place in Victoria that does HPC Coating???
I have only found one place in Leongatha, about 5 hours drive from my house. Does anyone know of other places??
any help is very appreciated.
Cheers
Ryan
Posted: Tue Oct 03, 2006 11:39 pm
by adamjp
Try
Jet Hot in Castlemaine
hpc coating in Victoria
Posted: Wed Oct 04, 2006 3:21 pm
by trader
Hi Ryan
I used HPC in Leonthagga. They had a deal with Aust Post because of volume and did door to door pretty cheap - to Canberra anyway. Cant fault their product either although gloss has gone off aluminium extractors but still looks good.
Dave
Posted: Wed Oct 04, 2006 3:48 pm
by green_comet
Thanks for the help guys..
Well i got quoted $210 from HPC in Leongatha to get them coated, and was quoted $220 from Jet-Hot.. postage was both $15 each way..
So is $250 with Jet-Hot inc postage , and $240 with HPC inc postage...
Think ill go with HPC, unless there is much difference between the two companys coatings..
thanks again.
Ryan
Posted: Mon Oct 16, 2006 2:13 pm
by green_comet
Posted: Mon Oct 16, 2006 3:14 pm
by StanTheMan
Posted: Mon Oct 16, 2006 3:38 pm
by Russellb
Damn My old Header look Way Sexy Now
Good to here your going to join the TURBO SIDE OF THE FORCE
Re:
Posted: Mon Oct 16, 2006 3:46 pm
by green_comet
Russellb wrote:Damn My old Header look Way Sexy Now
Good to here your going to join the TURBO SIDE OF THE FORCE
yeah they dont look too bad..
Shame i sent them away for HPC coating, before i opted to go turbo. Looks like they will be back up on ebay soon, unless someone on here wants them??
Hey Russell, what computer are you using to run your turbo setup? I think im going to go with a greddy e-manage ulimate, seems really good for the price.
Posted: Mon Oct 16, 2006 4:19 pm
by timk
His signature says Autronic in bolded red but the main objective of my post was a shameless plug for my
MegaSquirt thread!
Posted: Mon Oct 16, 2006 4:44 pm
by green_comet
who said that??
need to get my eyes checked..
Posted: Mon Oct 16, 2006 6:18 pm
by Russellb
Like Saboteur Said. Using the SMC v1.94 but it needs a dwell board fitted
I got the ECU cheep and I know how to program them. If I had to buy a new
one I would get the SM4. It has a heap more functions
www.autronic.com I made mine Plug and Play so if I undo the turbo I can turn it back to STD
Nice and Easy
Posted: Fri Oct 20, 2006 10:59 am
by green_comet
Well got the exhaust done yesterday, at Performance exhausts in ringwood. They did an ok job, had to go back a couple times as the pipe was to close to the diff, and was rattling. But its all fixed now...
Its a 2 1/4 mild steel pipe. HPC headers, into hiflow cat, in resinator, into magniflow stainless muffler.... Screams through mid range, and top end now, feels alot smoother, all in all a very good mod. It sounds pretty nice too, ill try get a sound file up
Here's some pics..
Next up mania cold air intake..
Posted: Tue Oct 24, 2006 5:45 pm
by JSE
looks great!
mania cold air intake is worth it...especially for the sound it makes in-cabin. GRAAAAAAAHHH!
