mx5cartalk.com

Hi there
Just wondering

will this sparco seat will fit on my NA8 with just screwing two more holes on stock rails?


or do I have to custom the rails?


Cheers

Oscar

Yes. It's a Sparco Sprint Junior.

oh great
anyone would like to install it for me?
i can offer a pack of 6 VBs

Cheers

Oscar

p.s. posted in wrong section.

Would help to list your location. The install isn't that difficult if you know how to use a drill. You could attempt it yourself.

I did it myself and I don't know how to use a drill. The NA ones are easy. With the NB some grinding is required.

I m around Eastwood in sydney =D

i m an idiot of using tools
that's better if someone can help with 6 VBs

we have a dodgy day coming up next month. if u can wait, i'm sure someone could do it for u. just supply bread or butter or onions for the day lol

THANKS GUYS

ps.
just new being a mazda owner

used to be a honda fan

now i want to say...

mazda owners are so much nicer!

its pretty simple to install:

flip the sparco seat upside down and measure the holes vertically under the seat
it should measure up to 270mm

unbolt your seat from the rails, measure 270mm and drill a hole in the rails for both sides
(you can reuse the bolts taken off from the stock seat for the sparco seat)

All you need is a high impact drill + some muscles

it takes about 20mins

Also check this post out !
http://forum.miata.net/vb/showpost.php? ... stcount=76

s2ky_mx wrote:its pretty simple to install:

flip the sparco seat upside down and measure the holes vertically under the seat
it should measure up to 270mm

unbolt your seat from the rails, measure 270mm and drill a hole in the rails for both sides
(you can reuse the bolts taken off from the stock seat for the sparco seat)

All you need is a high impact drill + some muscles

it takes about 20mins

Also check this post out !
http://forum.miata.net/vb/showpost.php? ... stcount=76

20 mins did you have a half time break lol

sliq wrote:we have a dodgy day coming up next month. if u can wait, i'm sure someone could do it for u. just supply bread or butter or onions for the day lol

Oscar, have a read here. This is what sliq is talking about. viewtopic.php?f=63&t=41747

There will be plenty of people to help you and you'll meet some of the members.

20 mins did you have a half time break lol

Dril was getting hot, cool down time for the drill had also been taken into account

When broady and I did my one it tool us a while longed than that. Mind you it was an NB rail so grinding was part of the job. We did fry a Dremel as well.

sliq wrote:we have a dodgy day coming up next month. if u can wait, i'm sure someone could do it for u. just supply bread or butter or onions for the day lol

how come i dont know about the dodgy day