Idle problem NA
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
myredmx5
- Fast Driver
- Posts: 498
- Joined: Fri Mar 02, 2012 5:13 pm
- Vehicle: NA8
- Location: Newcastle Area NSW
Re: Idle problem NA
Maybe a vacuum problem?
-
93_Clubman
- Speed Racer
- Posts: 12008
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Idle problem NA
Have you checked the ignition timing setting & other settings? Also disconnect battery, pump brake pedal a few times, then reconnect battery to clear ECU. Here's some more detail on setting idle when there's an idle problem: viewtopic.php?f=76&t=60434
-
YanMa YatTai
- Fast Driver
- Posts: 219
- Joined: Wed Nov 02, 2011 11:07 pm
- Vehicle: NA6
- Location: Sydney
Re: Idle problem NA
^ that link has good advice. I just about went through each one of those items in the list without knowing that such a list existed!
There are so many possible causes. Mine had the same issues as yours (idle at 1500rpm).
I had a cracked crossover tube, bad injectors and bad ISCV. Cleaning the ISCV helped, but it wasnt until it was replaced that my idle was OK.
There are so many possible causes. Mine had the same issues as yours (idle at 1500rpm).
I had a cracked crossover tube, bad injectors and bad ISCV. Cleaning the ISCV helped, but it wasnt until it was replaced that my idle was OK.
-
greenb0x
- Driver
- Posts: 35
- Joined: Tue Aug 27, 2013 8:00 am
- Vehicle: NA8
Re: Idle problem NA
Did you do anything prior to noticing the bump in idle?
What happens when you block off the inlet tube to your idle control solenoid?
What happens when you block off the inlet tube to your idle control solenoid?
Who is online
Users browsing this forum: No registered users and 5 guests
