Wheel locking clunk
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Wheel locking clunk
The MX-5 is not FWD and does not have front CV joints. Maybe your steering rack is loose/broken or you have a ball joint loose/broken or some other serious issue with the steering.
-
NMX516
- Speed Racer
- Posts: 2057
- Joined: Mon Jun 19, 2006 12:05 pm
- Vehicle: NB SP
- Location: Brisbane
Wheel locking clunk
The wheels might not be rubbing against the body work, but could be touching either suspension components or "chassis rail" if larger than standard wheels are fitted.
Pain is temporary, quitting lasts forever.
-
Garry
- Speed Racer
- Posts: 3481
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: NB SP
- Location: God's Country
- Contact:
Wheel locking clunk
My car used to make a horrible squeak on full lock. It turned out that the stone shield around the brake rotor had bent somehow and was rubbing on the lower control arm on full lock.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
-
Charlie Brown
- Speed Racer
- Posts: 2623
- Joined: Mon Apr 28, 2003 11:00 am
- Vehicle: NC
- Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
- Contact:
Wheel locking clunk
I can answer this one easily.
Wheel Bearing.
Hellmun had the same problem a couple of weeks ago at Wakefield.
Luckily Russell was there with a spare to whip off the old one and put on the newie.
Wheel Bearing.
Hellmun had the same problem a couple of weeks ago at Wakefield.
Luckily Russell was there with a spare to whip off the old one and put on the newie.
Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 6 guests
