Thems the rules, most people make sure the lower control arms are level as a maximium, and that centre of rim to guard are approx 12.5" f and 13 rear.
Me, my Clubbie is exactly nearly sortof 100mm ????????
Terry
what is the minimum height for lowering NA suspension Austal
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
tbro
- Racing Driver
- Posts: 1125
- Joined: Thu Jul 26, 2007 5:46 pm
- Vehicle: NA6
- Location: North Brisbane
what is the minimum height for lowering NA suspension Austal
Qld transport rules are 100mm min to any part of the car excluding lower control arms and wheels, so what that means is you MUST be able to pass a 100mm block under the vehicle without fowling any part. If you get a pandantic inspector they can measure it with min of 120kgs in the car.
Thems the rules, most people make sure the lower control arms are level as a maximium, and that centre of rim to guard are approx 12.5" f and 13 rear.
Me, my Clubbie is exactly nearly sortof 100mm ????????
Terry
Thems the rules, most people make sure the lower control arms are level as a maximium, and that centre of rim to guard are approx 12.5" f and 13 rear.
Me, my Clubbie is exactly nearly sortof 100mm ????????
Terry
"Racing shouldn't be for rich idiots, but for all idiots"
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 18 guests
