Stuart & Lisa's MINX

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

Post Reply
User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: Stuart & Lisa's MINX

Postby Lokiel » Sun Oct 03, 2010 10:25 pm

Stuart took me for a spin in MINX on Saturday and the delivery of power is extremely progressive and smooth with the Haltech, no coughing or hesitations at all like on mine during hard acceleration :cry:

Definitely one of my next modz.
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Top
User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

Re: Stuart & Lisa's MINX

Postby MINX » Mon Oct 11, 2010 1:11 pm

Updated - Current Engine bay Pics.

(charcoal canister removed)

Image
Image
Image
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08
Top
User avatar
Novice1
Racing Driver
Posts: 1343
Joined: Sat Jan 06, 2007 5:40 pm
Vehicle: ND - 2 GT
Location: Brisbane

Re: Stuart & Lisa's MINX

Postby Novice1 » Mon Oct 18, 2010 10:35 pm

Hi Stu,
My pms dont seem to be reaching you. Re your query on dump pipe...yes thats the right guy, details..
Cheers Novice1
Top
User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

Re: Stuart & Lisa's MINX

Postby MINX » Tue Nov 09, 2010 11:31 am

BC Coil overs installed.
Current ride height about 12" front, 12.5" rear.

Stock

Image

BCs Fitted

Image
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08
Top
User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: Stuart & Lisa's MINX

Postby Lokiel » Tue Nov 09, 2010 12:46 pm

Congrats on the install, it's a bugger of a job to do on your own if you've never done it before and feels like a mighty accomplishment when done.

Now you just have to figure out if you're "too low" or not :(
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Top
User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

Re: Stuart & Lisa's MINX

Postby MINX » Tue Nov 09, 2010 1:18 pm

Yep, i am too low.
Not a particularly easy job to set the height.
Needs to come up 1/2" at least.

Just went for drive. Seems pretty good, soaks up bumps well.
I heard the tyre touch the inner guard liner on one corner, so she has to come up a bit.

The TDR Splitter is on now too.

Image
Image
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08
Top
User avatar
Okibi
Speed Racer
Posts: 10910
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:
Contact Okibi

Re: Stuart & Lisa's MINX

Postby Okibi » Tue Nov 09, 2010 9:05 pm

Looks hot. :mrgreen:
If you had access to a car like this, would you take it back right away? Neither would I.
Top
User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: Stuart & Lisa's MINX

Postby Lokiel » Tue Nov 09, 2010 10:53 pm

MINX wrote:Yep, i am too low.
Not a particularly easy job to set the height.
Needs to come up 1/2" at least.
:


I'm currently at 12.4" front and 12.7" rear (measured this tonight) on my BCs and there are a couple of speed bumps I'm still wary of. 12.5" front and 12.75"or 13" rear should be about right. Keith Tanner from FM recommends the rears be 0.5" higher than the front (between 12" and 12.5" in front) , Good-win racing recommends 0.25".

You just need to adjust the BC coilovers so that the threaded section has an additional 0.5" between the top and bottom locking rings (ie. you now know how low the car has settled on the shocks - the height of the threaded section remains fixed so changes to that section should translate directly to ride height adjustments).
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Top
User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

Re: Stuart & Lisa's MINX

Postby MINX » Wed Nov 10, 2010 2:11 pm

OK, here are some pics, New 6ULs fitted.
Tyres remain same type, BFG GForce Sport, but change size.
Saved 2.2 kilos per wheel/tyre combo.

Image
Image
Image
Image
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08
Top
User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

Re: Stuart & Lisa's MINX

Postby MINX » Wed Nov 10, 2010 2:13 pm

Image

Image

Image

Image
Image
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08
Top
User avatar
twinlol
Driver
Posts: 92
Joined: Tue Jul 14, 2009 10:20 am

Re: Stuart & Lisa's MINX

Postby twinlol » Wed Nov 10, 2010 3:01 pm

Beautiful.
Might I ask where the front splitter is from?
Top
User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:
Contact Charlie Brown

Re: Stuart & Lisa's MINX

Postby Charlie Brown » Wed Nov 10, 2010 3:09 pm

MINX wrote::OK, here are some pics, New 6ULs fitted.
Tyres remain same type, BFG GForce Sport, but change size.
Saved 2.2 kilos per wheel/tyre combo.



Must be the loss of all that weight from the gunmetal paint on the original rims. :P


Nah, looks good Stuart. Like the splitter. 8)
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20
Top
User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

Re: Stuart & Lisa's MINX

Postby MINX » Wed Nov 10, 2010 3:29 pm

twinlol wrote:Beautiful.
Might I ask where the front splitter is from?


Thanks, Sure, Track Dog Racing
http://www.trackdogracing.com/website/air_splitters.htm
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08
Top
User avatar
Old Dude
Racing Driver
Posts: 1166
Joined: Tue Apr 07, 2009 8:06 pm
Vehicle: NB8B
Location: Gold Coast

Re: Stuart & Lisa's MINX

Postby Old Dude » Wed Nov 10, 2010 3:59 pm

I like the look of those new rims Stuart, I prefer them to the black ones.
Very nice
Cheers
Dale 8)
"Everybody dies......, but not everybody lives" ;-)

MX 5 2001 Grace Green
NB8B
Top
User avatar
twinlol
Driver
Posts: 92
Joined: Tue Jul 14, 2009 10:20 am

Re: Stuart & Lisa's MINX

Postby twinlol » Wed Nov 10, 2010 4:06 pm

Thanks very much, it might make a appearance on my car in the future :D
Once again, great car, great style.
Top
Post Reply

Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: Google [Bot] and 3 guests