Jeremy's NA6

PaulF · Postby **PaulF** » Fri Jul 29, 2011 2:14 am

Do you have spacers behind those RPF1's?

JeremyH · Postby **JeremyH** » Fri Jul 29, 2011 1:24 pm

No spacer, nothing just plug n play

PaulF · Postby **PaulF** » Fri Jul 29, 2011 3:42 pm

Oh I see, they're +19 offset. I'd only seen them in higher offsets before and I was wondering why they filled out the guards so well. They look really good.

JeremyH · Postby **JeremyH** » Fri Jul 29, 2011 4:12 pm

Thanks

Nemo · Postby **Nemo** » Fri Jul 29, 2011 8:36 pm

Been spotting your car around uni lately, car looks awesome. Just wish 15" RPF1's came in the same offset.

JeremyH · Postby **JeremyH** » Fri Jul 29, 2011 9:12 pm

Yea haha.. What color is your car? Is it red with black hardtop?

Nemo · Postby **Nemo** » Fri Jul 29, 2011 9:34 pm

JeremyH wrote:Yea haha.. What color is your car? Is it red with black hardtop?

Yep that's mine on Work Equip's now. Most of the time you're there before I get there and still there when I leave though lol.

JeremyH · Postby **JeremyH** » Fri Jul 29, 2011 9:58 pm

Yes, my course is damn busy.
I do architecture, what do you do.

JeremyH · Postby **JeremyH** » Sat Jul 30, 2011 4:06 pm

Today's wash + lower the rear suspension by 1cm

JeremyH · Postby **JeremyH** » Tue Aug 02, 2011 8:18 pm

Try to polish my car, but no difference, any tips?

JeremyH · Postby **JeremyH** » Tue Aug 09, 2011 11:06 am

Anyone very kind post a comment on this

Nemo · Postby **Nemo** » Tue Aug 09, 2011 12:55 pm

Nice mascot on your dash.

Postby **NitroDann** » Tue Aug 09, 2011 1:14 pm

You need to wax it if you havent.

It looked fine before why polish it?

What polish did you use exactly?

Dann

bensale · Postby **bensale** » Tue Aug 09, 2011 3:56 pm

The finish looks pretty good in the pictures..! So you're going to struggle to gain a massive improvement.

When I still had nice paint I got very good results though using a clay bar to remove imperfections and smooth the surface, I would highly recommend trying it. Then perhaps a cleansing polish and then a sealing wax so you maintain the finish. I bought some really good specialist stuff which worked brilliantly as far as polish and wax, can get you the names if you want. I haven't polished the car lately as I have a few paint chips which cracked the paint badly on the front now (track days, flood waters and interstate driving) but it still had a nice shine thanks to the work I put in well over a year ago.

JeremyH · Postby **JeremyH** » Tue Aug 09, 2011 5:36 pm

It only looked good on the picture, but actually paint is pretty rough. I have try clay it, but haven't get very smooth surface, for the polish i use autoglym supreme polish. It just don't through the paint.