NitroDann's Long Awaited Garage Thread

noobee · Postby **noobee** » Wed Oct 30, 2013 9:28 pm

what model td04 is it, or what wheel sizes are in that,(compressor and turbine).i've been looking at Kinugawa td04's and interested in how this goes.
Mick

Postby **NitroDann** » Wed Oct 30, 2013 9:31 pm

Okibi wrote:Solution would be to use the same bolt patten as the jenvey ones, afaik they're the same for 1.6, 1.8.

What would also be cool is a better plenum and bigger throttle body to suit the different jenvey adaptors like these:
http://www.jenvey.co.uk/home/manifold/jenvey-dynamics/manifold-mazda-mx5-1-8-tb-mmz02

The port centre distance is different between 1.6 and 1.8L.

Dann

Postby **NitroDann** » Thu Oct 31, 2013 2:16 pm

Be carefull with angle grinders people. They are dangerous. I got my hand so this is an open apology to anyone waiting on parts they may be delayed a day or 2. Looks like i just need some stitches.

Photos not appropriate for the forum. Ill post some post stitches.

Dann

plohl · Postby **plohl** » Thu Oct 31, 2013 2:18 pm

NitroDann wrote:

Be carefull with angle grinders people. They are dangerous. I got my hand so this is an open apology to anyone waiting on parts they may be delayed a day or 2. Looks like i just need some stitches.

Photos not appropriate for the forum. Ill post some post stitches.

Dann

Hope it's just stiches dude!

Sent from my SM-N9005 using Tapatalk

Postby **NitroDann** » Thu Oct 31, 2013 2:23 pm

Its not very bad or big its just deep and minced up. Lost most of a day at work. I should be able to get back into it tomorrow. I hoped to have the above kit completed by tonight along with posting the mazdaspeed throttle body inlets and bovs sold so far.

Dann

Pokmx5 · Postby **Pokmx5** » Thu Oct 31, 2013 2:50 pm

Mate, take care of your self. We need this induction kits....

haha no rush atm mate, get well soon.

16bit · Postby **16bit** » Thu Oct 31, 2013 3:22 pm

hope you mend up mate and no ligaments etc got cut.

16bit · Postby **16bit** » Thu Oct 31, 2013 3:26 pm

to add to this don't start lawn mowers with thongs on, its not a great idea.

Shambler · Postby **Shambler** » Thu Oct 31, 2013 3:42 pm

Damn Dann! Hope the hand is okay!

Want me to hold off dropping the car off this weekend?

16bit · Postby **16bit** » Thu Oct 31, 2013 3:56 pm

na, just as long as you don't hand it over. :lol:

Postby **Okibi** » Thu Oct 31, 2013 6:31 pm

Hope it's not too bad and there's no tendon or nerve damage.

Muzdaman · Postby **Muzdaman** » Thu Oct 31, 2013 6:34 pm

I got myself with a flapper disc a few months ago. Was very lucky it was fairly minor. Hope yours is alright mate.

Black_Penguin · Postby **Black_Penguin** » Thu Oct 31, 2013 6:39 pm

Agree with being careful with angle grinders, I nicked 2 knuckles on my left hand with a sanding disk last year.
I got away with small cuts that healed into scars, would hate to imagine the result if it was a cutting disk.

manga_blue · Postby **manga_blue** » Thu Oct 31, 2013 7:47 pm

Angle grinder and Stanley knife: two most dangerous tools in the toolbox. Hope it's right again soon, Dann.

Veloce · Postby **Veloce** » Thu Oct 31, 2013 10:40 pm

Would you believe some nutter came in to Bunnings a few weeks ago and was asking for a cutting wheel for timber to fit to his 4 1/2" angle grinder! :shock: