A wee bit scary

hks_kansei · Postby **hks_kansei** » Wed Aug 20, 2014 4:28 pm

Must have been a no-brand one from ebay then.

StanTheMan · Postby **StanTheMan** » Wed Aug 20, 2014 4:28 pm

Ohhh that's gold

StanTheMan · Postby **StanTheMan** » Wed Aug 20, 2014 4:29 pm

MAde in low cost Chinese factory?

StanTheMan · Postby **StanTheMan** » Wed Aug 20, 2014 4:29 pm

Didn't pass the Aussie QA test perhaps

StanTheMan · Postby **StanTheMan** » Wed Aug 20, 2014 4:30 pm

I paid big dollar .... Even had A Brembo sticker on the brake cover

hks_kansei · Postby **hks_kansei** » Wed Aug 20, 2014 5:01 pm

StanTheMan wrote:Didn't pass the Aussie QA test perhaps

It had a QA sticker, but it was misread.

It was actually telling people the product was made by Qin Ang Manufacturing co, and their logo just happens to look very similar to the Aussie QA Quality Assured logo, nobody would take them seriously in the home market if they used an original logo.

sailaholic · Postby **sailaholic** » Wed Aug 20, 2014 5:07 pm

This thread has turned to gold!

sailaholic · Postby **sailaholic** » Wed Aug 20, 2014 5:49 pm

90% of statics are made up on the spot!

gslender · Postby **gslender** » Wed Aug 20, 2014 5:52 pm

Dupain wrote:90% posters on this thread are from QLD and voted for Clive Palmer. Conclusions about IQs are easily made.

Like most of your posts, this one is also clueless and lacks any substance or fact...

Clive Palmer won the seat of Fairfax with only 26% of the votes. Fairfax represents only 2% of the QLD total population so your comment is so baseless it actually borders on stupidity (which aligns with most of what you have posted so far).

A quick count of the posters against this thread easily shows that it is nothing like 90% either....

A saying by a famous leader... "Better to remain silent and be thought a fool than to speak out and remove all doubt" ... so go on, keep posting.

StanTheMan · Postby **StanTheMan** » Wed Aug 20, 2014 5:54 pm

we were going so well.....

StanTheMan · Postby **StanTheMan** » Wed Aug 20, 2014 5:57 pm

gslender wrote:
Dupain wrote:90% posters on this thread are from QLD and voted for Clive Palmer. Conclusions about IQs are easily made.

Like most of your posts, this one is also clueless and lacks any substance or fact...

Clive Palmer won the seat of Fairfax with only 26% of the votes. Fairfax represents only 2% of the QLD total population so your comment is so baseless it actually borders on stupidity (which aligns with most of what you have posted so far).

A quick count of the posters against this thread easily shows that it is nothing like 90% either....

A saying by a famous leader... "Better to remain silent and be thought a fool than to speak out and remove all doubt" ... so go on, keep posting.

My e-bay sarcasm meter may be faulty. Perhaps you got you fishing troll meter at the same place.
I think its beer time. have a great night everyone

sailaholic · Postby **sailaholic** » Wed Aug 20, 2014 6:06 pm

Not in my uni course. Must be us xenophobic qlders.

speed · Postby **speed** » Wed Aug 20, 2014 7:16 pm

Dupain wrote:Xenophobia alive and well. Look at all the top results at high school/University. All Chineses but hey they don't know how to nanufacture.

You've almost got it...

Sent from my iPhone using Tapatalk

speed · Postby **speed** » Wed Aug 20, 2014 7:40 pm

I now see where I've gone wrong all these years. I've never once asked a Chinese student for advice re my cars. Imagine the dollars I could have saved!
Also since they are so smart they instantly know all about manufacturing.
What could be wrong with that.. Right?!

Sent from my iPhone using Tapatalk

project.r.racing · Postby **project.r.racing** » Wed Aug 20, 2014 8:26 pm

Manufacturing 101. It's like Fluid Dynamics 101. It is one of the many uni courses you do. You get a free pass. You still have no understanding of the subject metter. But you have more courses to your name that other don't. So that makes you smarter than the others. Right?!