anyone know the right size spacers for factory 5 spoke 16" (2001) on a 1991 NA?
Im thinking 20mm though would like to be sure.
Bolt on Spacers for Track - Yes or No
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
- Fast Driver
- Posts: 218
- Joined: Tue Sep 25, 2012 9:11 am
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Bolt on Spacers for Track - Yes or No
There is no right/wrong size.
The wheels will fit without any spacers, it's just matter of deciding how much further out you want the wheels to poke and buying spacers in that size.
The wheels will fit without any spacers, it's just matter of deciding how much further out you want the wheels to poke and buying spacers in that size.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: Bolt on Spacers for Track - Yes or No
why would you spend $200 on factory 5 spoke NB rims, then spend another $200 on spacers? should've just spent $600-$800 and brought the correct offset rim.
- greenMachine
- Forum Guru
- Posts: 4147
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: Bolt on Spacers for Track - Yes or No
Why spacers at all? NA and NB have same suspension, may be a bit of difference at the guards (rear?), but I would have thought that spacers would make that more problematic, not less?


I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it
)
Build thread
NB SE - gone to the dark side (and loving it

-
- Fast Driver
- Posts: 218
- Joined: Tue Sep 25, 2012 9:11 am
Re: Bolt on Spacers for Track - Yes or No
cause i spent $150 on NB rims with near new rubber
and they are some of the lightest 16s around! also they look factory which i like too. that and spacers should only cost me $100 or so.
I just want a bit of a wider track.

I just want a bit of a wider track.
-
- Fast Driver
- Posts: 222
- Joined: Mon Feb 17, 2014 8:13 pm
- Vehicle: NB SE
Re: Bolt on Spacers for Track - Yes or No
A 20mm alloy spacer will also add about 800g-1kg. Still got a light wheel?
-
- Fast Driver
- Posts: 218
- Joined: Tue Sep 25, 2012 9:11 am
Re: Bolt on Spacers for Track - Yes or No
Danny wrote:A 20mm alloy spacer will also add about 800g-1kg. Still got a light wheel?
yup.
- KevGoat
- Speed Racer
- Posts: 3968
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Bolt on Spacers for Track - Yes or No
Sage wrote:Danny wrote:A 20mm alloy spacer will also add about 800g-1kg. Still got a light wheel?
yup.
16" NB8B 5 spoke, 205/45/16 ...

15" Racing Hart, 195/50/15 ...

- KevGoat
- Speed Racer
- Posts: 3968
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Bolt on Spacers for Track - Yes or No
Just for reference ...
SE 17" Racing Harts, 205/40/17 ...

SE 17" Racing Harts, 205/40/17 ...

-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: Bolt on Spacers for Track - Yes or No
16.5kg for 16x6.5 NB rims. that aint light.
my 18x7.5s weigh 18 flat with tyres. bet you cannot put 225s on the 6.5 wide rims.
my old ms-01r rims weight 7.2 each, and about 14 with tyres.
how much does a 16x6.5 nb rim weight without tyres? 7-8kg? if not, then meh...
my 18x7.5s weigh 18 flat with tyres. bet you cannot put 225s on the 6.5 wide rims.
my old ms-01r rims weight 7.2 each, and about 14 with tyres.
how much does a 16x6.5 nb rim weight without tyres? 7-8kg? if not, then meh...
Last edited by project.r.racing on Fri Feb 27, 2015 6:22 pm, edited 1 time in total.
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: Bolt on Spacers for Track - Yes or No
$100 for 4 bolt on 20mm spaces? with 16 bolts included?Sage wrote:cause i spent $150 on NB rims with near new rubberand they are some of the lightest 16s around! also they look factory which i like too. that and spacers should only cost me $100 or so.
I just want a bit of a wider track.
- KevGoat
- Speed Racer
- Posts: 3968
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Bolt on Spacers for Track - Yes or No
project.r.racing wrote:how much does a 16x6.5 nb rim weight without tyres? 7-8kg? if not, then meh...
According to http://www.miata.net/faq/wheel_weights.html and a Google conversion, they're 7.03kg ...
Edit: by comparison, these (Buddy Club P1 15x7 wheels) are 4.65kg naked ... (no affiliation btw - just wish I had spare cash to buy them...)
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: Bolt on Spacers for Track - Yes or No
P1s are good rims. I had a set about a decade ago.
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 7 guests